Welcome to the certification course!
Lesson 1 - Introduction
Lesson 2 - Before Installation
Lesson 3A - Installation of the Control Unit
-
Contents
-
Prepare
-
Alternative installation configurations
-
Unbox the control unit
-
Product overview
-
Mounting the CU to the wall or ceiling
-
Prepare to connect door strikes to the control unit
-
Assessing power consumption
-
Assessing if a strike is normally open or normally closed.
-
Typical cable coloring
-
Using the control unit to power and control 12/24V DC normally open (NO) door strikes
-
Using the control unit to power and control 12/24V DC normally open (NC) door strikes
-
Connecting a normally open door strike when power is supplied from another source
-
Connecting a normally open door strike when power is supplied from another source II
-
Connecting multiple doors to normally open door strikes when power is supplied from other sources
-
Connecting multiple doors using the same relay
-
Connecting multiple doors using the same relay II
-
Connecting to an existing elbow switch or a 3rd party door controller
-
Using the input-button on the control unit
-
Connecting a normally closed door strike when power is supplied from another source
-
Connecting a normally closed door strike when power is supplied from another source II
-
Connecting multiple doors to a normally open door strike when power is supplied from another source
-
Tilkobling av flere dører ved bruk av samme relé med normalt åpen sluttstykke når strøm leveres fra en annen kilde
-
The last step!
-
Quiz
Lesson 3B - Installasjon av skjermenheten
-
Contents
-
Unboxing the Display Unit
-
Product Overview
-
Installation types
-
Choosing the mounting height of the display
-
Choosing the position of the display
-
Other important factors you need to consider before installing the Defigo display unit
-
Position of the display by the door
-
Mounting the backplate
-
Installation on glass
-
Innfelt montering av skjermenheten
-
How to mount the display on the back plate
-
Quiz
